No. 7600
MIỄN PHÍ GIAO HÀNG
ĐƠN HÀNG TỪ 5.000.000Đ TRỞ LÊN
GIAO HÀNG THEO THOẢ THUẬN
ĐẢM BẢO CHẤT LƯỢNG
HÀNG NHẬP KHẨU CHÍNH HÃNG, CÓ NGUỒN GỐC RÕ RÀNG
Đầy đủ quyền lợi
Áp dụng Chương trình Khách Hàng thân thiết như mua ở Cửa hàng
  • Thông tin chi tiết
  • Order 
    no.    		 Size = 
    clamping force 
    [kN]    		 G Slot H min. H max. V Weight 
    [g]    		 SC CAD
    30 M12 14 6 68 13-110 2013   n.v.
    30 M16 18 6 68 16-114 2045   n.v.
    43** M16 18 5 80 16-134 3158   n.v.
    * Specified clamping forces in optimal clamping position (smallest distance of the clamping screw to the clamping position). Clamping forces can deviate depending on the clamping, strength class of the clamping screw and condition of the thread (lubrication).
    ** Size 43 kN available from June 2016.
    Application:
    1. Position and fasten carrier element on the tool table.
    2. The base element can be pushed into the desired position on the carrier element. After this is done, it is ready for operation.
    3. The height of the clamping arm can be adjusted continuously by actuating the adjusting bolt, which clamps the workpiece.
    4. The very robust design enables quick and easy clamping.
    Note:
    To reduce wear to the adjusting bolt, we recommend using AMF screw compound No. 6339. It possesses a synergistic combination of highly-effective solid lubricants and is heat-resistant and does not wash out.
    Advantage:
    - Low installation height
    - Up to 30 kN or 43 kN clamping force
    - Continuously adjustable in height and length
    - Use in T-grooves 14-24 mm or grid pallets M12 and M16
    - 2 thrust-piece variants
    Dimensions:
     
    Order 
    no.    		 Size A A1 B B1 G1 L L1 L2 SW
    553087 30 36 85 54 18 M16 135 13 25 8
    553088 30 36 85 54 18 M16 135 16 28 8
    553333 43 42 105 60 20 M20 155 16 32 10
  • Thông tin chi tiết
    Order 
    no.    		 Size = 
    clamping force 
    [kN]    		 G Slot H min. H max. V Weight 
    [g]    		 SC CAD
    30 M12 14 6 68 13-110 2013   n.v.
    30 M16 18 6 68 16-114 2045   n.v.
    43** M16 18 5 80 16-134 3158   n.v.
    * Specified clamping forces in optimal clamping position (smallest distance of the clamping screw to the clamping position). Clamping forces can deviate depending on the clamping, strength class of the clamping screw and condition of the thread (lubrication).
    ** Size 43 kN available from June 2016.
    Application:
    1. Position and fasten carrier element on the tool table.
    2. The base element can be pushed into the desired position on the carrier element. After this is done, it is ready for operation.
    3. The height of the clamping arm can be adjusted continuously by actuating the adjusting bolt, which clamps the workpiece.
    4. The very robust design enables quick and easy clamping.
    Note:
    To reduce wear to the adjusting bolt, we recommend using AMF screw compound No. 6339. It possesses a synergistic combination of highly-effective solid lubricants and is heat-resistant and does not wash out.
    Advantage:
    - Low installation height
    - Up to 30 kN or 43 kN clamping force
    - Continuously adjustable in height and length
    - Use in T-grooves 14-24 mm or grid pallets M12 and M16
    - 2 thrust-piece variants
    Dimensions:
     
    Order 
    no.    		 Size A A1 B B1 G1 L L1 L2 SW
    553087 30 36 85 54 18 M16 135 13 25 8
    553088 30 36 85 54 18 M16 135 16 28 8
    553333 43 42 105 60 20 M20 155 16 32 10

Sản phẩm cùng danh mục